Glossary Of Terms - AT&T TL96271 Guide D'utilisation

Bluetooth

Glossary of terms

Below are some terms used in this user's manual to help you become
familiar with using your Bluetooth devices and your new AT&T telephone
system.
Active devices - the Device list has two active slots for two cell phones, or
one cell phone and one headset. When a device in the list is active it will
have a D1: or D2: in front of the device name. In order to use a Bluetooth
device on a call, it must be in an active slot and be connected.
Bluetooth cell phone - refers to a mobile Bluetooth enabled cellular
telephone.
CELLULAR line - the telephone line associated with your cell phone service.
On your TL96271/TL96371/TL96471, press CELL on the handset or
CELLULAR on the base to use the cell line.
Connected - when you pair a Bluetooth device to the TL96271/TL96371/
TL96471 it is placed in a active slot and automatically connected. When a
device is connected a 1 and/ or 2 will display after on the handset screen
and the DEVICE 1 and/or DEVICE 2 light on the telephone base will be on. If
a device loses its connection to the telephone base, it must be reconnected
before you can use the device with the TL96271.
/ /
Disconnected -when a device is disconnected, 1 and/or 2 displays after
on the handset screen and the DEVICE 1 and/or DEVICE 2 light on the
telephone base is off.
Discoverable mode - before a Bluetooth enabled device can be paired, it
must be set to this mode. When pairing your cell phone, the telephone base
is set to this mode. Depending on the cell phone manufacturer, this mode is
sometimes referred to as Find Me or Visibility.
Paired devices - Bluetooth enabled devices (cell phones or headsets) that
have shared registration information with the telephone base. A total of four
Bluetooth enabled devices can be paired to the telephone base. However,
only two paired devices can communicate with the base at a time.
Pairing - sometimes referred to as bonding. The process of sharing
registration information between two Bluetooth enabled devices. Your
Bluetooth enabled cell phone or headset must first be paired to the
telephone base in order to use it with this telephone system.
PIN - by default, the PIN is 0000 for the telephone base and for most
Bluetooth devices. PIN information must be exchanged between Bluetooth
devices before they can be used. This is also known as a Passkey
or Passcode.
18