Ptt To A Single Handset - AT&T TL96271 Guide D'utilisation

Multiple handset use
Push-to-talk (PTT)
Using the telephone base:
1. Press PTT when the handset is not in use. The
PUSH TO TALK menu displays.
2. Press CID or DIR
press SELECT.
3. Press CID or DIR
SELECT to save. You hear a confirmation tone.

PTT to a single handset

Using a cordless handset:
1. You have two ways to begin a PTT call:
• If you have one handset, press and hold PUSH TO TALK when the
handset is not in use.
-OR-
• If you have more than one handset, press PUSH TO TALK when
the handset is not in use. Then use the dialing keys to enter a
handset number (0 for telephone base, 1-9 for handsets 1-9,
TONE and 0 for handset 10, TONE
TONE and 2 for handset 12), or press
the desired handset or the telephone base, then press
PUSH TO TALK to create the push-to-talk session.
2. Your handset displays Connecting to HANDSET X... or Connecting to
BASE 0... for a few seconds. When the connection is made, both your and
the destination handsets display Press and hold [PTT] to talk and beep
once.
3. Press and hold PUSH TO TALK on your handset. A chirp indicates your
microphone is on. Speak towards the handset. Your voice is broadcast
to the destination handset. While you are speaking, the handset displays
PTT To HANDSET X (X represents the destination handset number) or
PTT To BASE 0.
4. Release PUSH TO TALK after speaking. Both handsets beep once again.
After the handsets beep, you can press and hold PUSH TO TALK to continue
speaking or the destination handsets can respond (see Answer a PTT call
on page 84).
5. To end the PTT call, press
Push to talk Ended for a few seconds.
-OR-
Place the handset in the telephone base or charger to end the PTT call.
NOTE: After PUSH TO TALK is released, the PTT call remains open for a short time. If no
one presses PUSH TO TALK within 10 seconds, the PTT call ends automatically.
to highlight PTT On/Off, then
to highlight On or Off, then press
and 1 for handset 11 or
OFF/
CANCEL
80
PUSH TO TALK
HANDSET B
Group
PTT On/Off
BACK
INCOMING PTT
On
Off
BACK
CID or DIR to scroll to
SELECT
or END. The handset displays
3
SELECT
SELECT
or