Auto Connection - AT&T TL96271 Guide D'utilisation

Bluetooth
Bluetooth setup
9. The screen will display Adding Headset A to
device list... when the base is connecting to
your headset.
10. When a device is successfully connected, the handset
displays Headset A is added and connected to base
and the corresponding status icon ( 1 or
hear a confirmation tone. The corresponding light on
the telephone base (DEVICE 1 or DEVICE 2) turns on.
If you have trouble pairing your headset, it may not
be compatible with your TL96271/TL96371/TL96471.
Check the Bluetooth compatibility list at
NOTES: The pairing process may take up to one minute. If the pairing process fails, try again.

Auto connection

An active device may be disconnected from the telephone base when:
• The Bluetooth feature of your cell is turned off.
• The power of your device is turned off.
• Your Bluetooth device are not is not within range of the telephone base.
When the Bluetooth or power on the device is turned on or it moves within
range of the base, the base will try to reconnect to the Bluetooth device. If
you disconnect the device through the device list, the base will not attempt to
reconnect unless your device is moved out of range and back in range again
2). You
www.telephones.att.com
22
Adding
Headset A
to device
list...
Headset A
is added
and connected
to base.
.