Table des Matières
Publicité
Telephone settings
Telephone base settings
Voice announce caller ID
You can set your telephone base to announce the caller ID information for
incoming calls. The voice announce caller ID setting is independent for each
handset and telephone base.
To change the setting:
1.
Press
MENU
on the telephone base in idle mode to enter the main menu.
2.
Press CID or DIR to highlight Settings, then press SELECT.
3.
Press CID or DIR to highlight Caller ID Annc, then press SELECT.
4.
Press CID or DIR to highlight Handset or Base, then press SELECT.
5.
Press CID or DIR to choose
a confirmation tone.
NOTES:
•
When there are up to five handsets registered, the telephone system supports caller ID
announce for the telephone base and all handsets. If six or more handsets are registered,
the system supports caller ID announce for the first four registered handsets only.
•
If the phone number of the incoming call matches the last 7 digits of a directory entry,
the name will be announced as it appears in the entry.
•
The phone number will be announced when the name is unknown, private or not
provided. Only the last 11 digits of a phone number is announced.
•
No information will be announced if both the name and number are private, unknown or
not provided.
•
This feature is not supported with headsets.
•
This feature does not announce information for call waiting calls.
•
If both home and cell lines are ringing, only the caller ID information of the first ringing
line will be announced.
•
The voice announce caller ID feature is available in English only.
•
If you set the number of rings for the answering system as 3 rings (page 118), the
answering system may not have enough time to announce the caller's full information.
Website
You can use this feature to view the AT&T website address
for product support or accessory purchasing.
1.
Press
MENU
on the telephone base in idle mode to
enter the main menu.
2.
Use CID or DIR to scroll to Website, then press
SELECT. The screen shows the AT&T website address.
3.
Press
OK
to exit.
On
or Off, then press
52
SET
to save. You hear
Bluetooth
Ringers
Set date/time
Website
BACK
SELECT
www.telephones
.att.com
OK
Publicité
Table des Matières
Dépannage
