AT&T TL96271 Guide D'utilisation page 141

Appendix
Screen messages
No message
No signal.
Call ended.
Not available
at this time
ON HOLD
Out of range
OR
No power at
base
** Paging **
Place
in charger
PTT From
HANDSET X
To
base & HS Y
PTT From
HANDSET X
To
handset Y
PTT To
HANDSET X
PTT To
BASE 0
Push to talk
Ended
Put handset
on BASE
to register
Ringer muted
Saved
Unable to save
Unable to save
XX Missed calls
XX New messages
There is no message recorded on the answering system.
The phone lost the connection with the telephone base
or did not have a strong enough signal and the phone
call ended.
Someone else is already using the directory or caller ID
history.
A call has been put on hold.
The handset has lost communication with the
telephone base.
There is no power connected to the telephone base.
The telephone base is paging all handsets.
The battery is very low. The handset should be placed in
the charger.
One handset has started a PTT session to another
handset.
One handset has started a PTT session to another
handset.
You have started the PTT process.
You have started the PTT process.
The PTT session is ended.
Your handset is not registered to the telephone base.
The ringer is muted temporarily during an incoming call.
The entry is now in the directory.
You are trying to save an entry with no name and
number from the caller ID history.
You are trying to save an entry with no name and
number from the caller ID history.
There are new calls in the caller ID history.
There are new messages recorded in the answering
system.
135