Set Out Of Operation / Disassembly / Environmental Protection; Shutting Down - Ecolab EMP KKS E60 Manuel D'utilisation

Set out of operation / disassembly / environmental
protection
15

Set out of operation / disassembly / environmental protection

Personnel:
DANGER!
Risk of injury due to the disregard of the specified personal protective
equipment (PPE)!
For all disassembly work, please respect the use of the PSA which is specified
on the product data sheet.
15.1

Shutting down

DANGER!
The procedures described here may only be carried out by skilled personnel
using PPE.
The procedure for shutting down is as follows:
1. Before carrying out any subsequent work, isolate the electrical supply completely
first of all and secure it against being switched on again.
2. Physically disconnect the entire power supply; dissipate stored residual energy.
3. Drain and remove operating fluids and consumables.
4. Remove the remaining processing materials and dispose of them
in an environmentally-friendly way.
417101442 Rev. 12-02.2019
n Manufacturer
n Production supervisor
n Operator
n Mechanic
130