Setup; Emp Kks E60 And Emp Kks E60; Versions; Dongle-Box" Ports - Ecolab EMP KKS E60 Manuel D'utilisation

5.3 Indicators / Controls / Jacks
5.3.1

EMP KKS E60 and EMP KKS E60

Fig. 5: EMP KKS E60 and EMP KKS E60
Pos. Description
1 Control knob for setting the stroke length
2 Menu/Exit, up arrow key
3 Menu/Exit, down arrow key
4 Start/Stop key (Enter function)
5 Test key
6 Graphical display
input for low-level advance warning and empty report
Ä Chapter 7.2.2 'Connection assignments of Slolt I (3-terminal) Input for low-level advance warning
(
I
and empty report ' on page 37 &
(3-terminal)' on page 127)
input for pulse- / standard signal and metering lock
Ä Chapter 7.2.3 'Connector assignment of slot II (5-terminal) Input for pulse signal, standard signal,
(
II
metering lock, batch and metering monitoring ' on page 39 &
conductor coloring Connector II (5-terminal)' on page 127)
and empty report, fault report and stroke signal
( Ä Chapter 7.2.4 'Connector assignments of slot III (4-terminal) Output for alarm and stroke signal'
III
on page 44 &
on page 128)
mains power supply
IV
( Ä Chapter 7.2.5 'Connector assignments of slot IV, mains power supply' on page 47)
5.3.2

„Dongle-Box" ports

Fig. 6: Dongle-Box
Pos. Bezeichnung
V input for oval gear meter
VI connection for pulse input to EMP pump (input II)
VII input for batch pulse and metering lock
VIII input for pulse, standard signal input and metering lock
+

versions

+
Ä Chapter 14.6.1 'Pin assignment / conductor coloring Connector I
Ä Chapter 14.6.3 'Pin assignment / conductor coloring connector III (4-terminal)'
29
Ä Chapter 14.6.2 'Pin assignment /
417101442 Rev. 12-02.2019

Setup