Automatic Switch-Off; Heat Setting; Powerboost - AEG IAE84881FB Notice D'utilisation

6.2 Automatic Switch Off
The function deactivates the hob
automatically if:
• all cooking zones are deactivated,
• you do not set the heat setting after you
activate the hob,
• you spill or put something on the control
panel for more than 10 seconds (a pan, a
cloth, etc.). An acoustic signal sounds and
the hob deactivates. Remove the object or
clean the control panel.
• the hob gets too hot (e.g. when a
saucepan boils dry). Let the cooking zone
cool down before you use the hob again.
• you use incorrect cookware or there is no
cookware on a given zone. The white
cooking zone symbol blinks and the
induction cooking zone deactivates
automatically after 2 minutes.
• you do not deactivate a cooking zone or
change the heat setting. After some time
a message comes on and the hob
deactivates.
The relation between the heat setting and
the time after which the hob deactivates:

Heat setting

1 - 2
3 - 5
6
7 - 9
When you use Pan Fry the hob
deactivates after 1.5 hours. For
Sous Vide the hob deactivates
after 4 hours.
6.3 Using the cooking zones
Place the cookware in the centre of the
selected cooking zone. Induction cooking
zones adapt to the dimensions of the bottom
of the cookware automatically.
Once you place a pot on the selected
cooking zone the hob automatically detects it
and the relevant slider appears on the
display. The slider is visible for 8 seconds,
after that time the display goes back to the
The hob deactivates
after
6 hours
5 hours
4 hours
1.5 hour
main view. To close the slider faster tap the
screen outside of the slider area.
When other zones are active the heat setting
for the zone you want to use may be limited.
Refer to "Power Management".
Make sure that the pot is
suitable for induction hobs. For
more information on cookware
types refer to "Hints and tips".
Check the size of the pot in
"Technical data".
6.4 Heat setting
1. Activate the hob.
2. Place the pot on the selected cooking
zone.
The slider for the active cooking zone
appears on the display and is active for 8
seconds.
3. Touch or slide your finger to set the
desired heat setting.
The symbol turns red and becomes bigger.
You can also change the heat setting while
cooking. Touch the zone selection symbol on
the main view of the control panel and move
you finger to the left or right (to lower or
increase the heat setting).

6.5 PowerBoost

This function activates more power for the
appropriate induction cooking zone; it
depends on the cookware size. The function
can be activated only for a limited period of
time.
1. Touch the desired zone symbol first.
2. Touch or slide your finger to the right
to activate the function for the chosen
cooking zone.
The symbol turns red and becomes bigger.
The function deactivates automatically. To
deactivate the function manually select the
zone and change its heat setting.
ENGLISH 13