Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
18
Operating the appliance
Automatic switch off
Cooking surface
• If after switching on the cooking surface, a heat setting is not set for a cook-
ing zone within approx. 10 seconds, the cooking surface automatically switch-
es itself off.
• If one or more sensor fields are covered by objects (a pan, etc.) for longer than
approx. 10 seconds, a signal sounds and the cooking surface switches off au-
tomatically.
• If all cooking zones are switched off, the cooking surface automatically
switches itself off after approx. 10 seconds.
Control panel
• When the appliance is switched off, if one or more of the sensor fields on the
control panel are covered for more that 10 seconds, an acoustic signal sounds.
The acoustic signal switches itself off automatically when the sensor fields are
no longer covered.
Induction cooking zones
• In the case of overheating (e.g. when a saucepan boils dry) the cooking zone
automatically switches itself off.
cooking zone must be set to
• If cookware that is not suitable is used,
minutes the indicator for the cooking zone switches itself off.
• If one of the cooking zones is not switched off after a certain time, or if the
heat setting is not modified, the relevant cooking zone switches off automati-
cally.
is displayed. Before being used again, the cooking zone must be set to
.
Heat setting
1 - 3
4 - 6
7 - 8
9 -14
All manuals and user guides at all-guides.com
and cooled down.
0
Switches off after
6 hours
5 hours
4 hours
1.5 hours
is displayed. Before being used again, the
lights up in the display and after 2
Publicité
Chapitres
Table des Matières
