Publicité
Les langues disponibles
Les langues disponibles
Hazard level
NOTICE:
Special symbols
Some hazard categories have specific symbols, as
shown in the following table.
Electrical Hazard
Electrical
Hazard:
Hot surface hazard
Hot surface hazards are indicated by a specific sym-
bol that replaces the typical hazard level symbols:
CAUTION:
Description of user and installer symbols
Specific information for personnel in
charge of installing the product in the
system (plumbing and/or electrical as-
pects) or in charge of maintenance.
Specific information for users of the
product.
Instructions
The instructions and warnings that are provided in
this manual concern the standard version, as descri-
bed in the sales document. Special version pumps
may be supplied with supplementary instruction leaf-
lets. Refer to sales contract for any modifications or
special version characteristics. For instructions, sit-
uations, or events that is not considered in this man-
ual or the sales document, contact the nearest Serv-
ice Center.
1.3 Disposal of packaging and product
Observe the local regulations and codes in force re-
garding sorted waste disposal.
1.4 Warranty
For information about warranty, see the sales con-
tract.
1.5 Spare parts
WARNING:
Only use original spare parts to replace
any worn or faulty components. The use
of unsuitable spare parts may cause
malfunctions, damage, and injuries as
well as void the guarantee.
Indication
Notices are used when
there is a risk of equip-
ment damage or de-
creased performance,
but not personal injury.
Permanent-magnet
hazard
CAUTION:
CAUTION:
Always specify the exact product type
and part number when requesting techni-
cal information or spare parts from the
Sales and Service Department.
For more information about the product's spare
parts, visit our website.
1.6 EC DECLARATION OF CONFORMITY
XYLEM SERVICE ITALIA S.R.L., WITH HEAD-
QUARTERS IN VIA VITTORIO LOMBARDI 14 -
36075 MONTECCHIO MAGGIORE VI - ITALY,
HEREBY DECLARES THAT THE PRODUCT:
ELECTRIC PUMP UNIT (SEE LABEL ON FIRST
PAGE)
FULFILS THE RELEVANT PROVISIONS OF THE
FOLLOWING EUROPEAN DIRECTIVES:
• MACHINERY 2006/42/EC (ANNEX II: THE
TECHNICAL FILE IS AVAILABLE FROM XYLEM
SERVICE ITALIA S.R.L.).
• ELECTROMAGNETIC COMPATIBILITY
2004/108/EC
• ECO-DESIGN 2009/125/EC, REGULATION (EC)
No 640/2009 & REGULATION (EU) No 4/2014
(MOTOR 3 ~, 50 Hz, PN ≥ 0,75 kW) IF IE2 or E3
MARKED, REGULATION (EU) No 547/2012
(WATER PUMP) IF MEI MARKED
AND THE FOLLOWING TECHNICAL STANDARDS
• EN ISO 12100, EN 809, EN 60204-1
• EN 61000-6-1:2007, EN
61000-6-3:2007+A1:2011+ AC:2012
• EN 60034–30
MONTECCHIO MAGGIORE,
02.10.2015
AMEDEO VALENTE
(DIRECTOR OF ENGINEERING
AND R&D)
rev.00
Goulds is a registered trademark of Goulds Pumps,
Inc., and is used under license.
2 Transportation and Storage
2.1 Inspect the delivery
1. Check the outside of the package for evident
signs of damage.
2. Notify our distributor within eight days of the de-
livery date, if the product bears visible signs of
damage.
Unpack the unit
1. Follow applicable step:
• If the unit is packed in a carton, then remove
the staples and open the carton.
• If the unit is packed in a wooden crate, then
open the cover while paying attention to the
nails and straps.
2. Remove the securing screws or the straps from
the wooden base.
2.1.1 Inspect the unit
en - Original instructions
13
Publicité
