Publicité
11 - ADDITIONAL FUNCTIONS
Functions:
/
11.2.1 CUSTOMIZING THE DELTA T SCREEN:
As with the other screens, you can simplify and organise your experience with additional functions in the « DELTA T » screen. Add or configure these
options quickly by pressing the "+" button.
CHEF'SCOMBI
Expert or Auto mode
This button displays the Expert or Auto mode screen, depending on the mode currently selected.
When a mode is selected, the button is changed to show the unselected mode. This approach makes it
possible to clearly distinguish between the mode currently in use and the one available as an alternative,
and to quickly switch from one mode to the other.
Fan speed
The fan speed adjustment function allows you to modulate the fan inside the cooking cavity, offering five
levels graduated from 1 to 5, where level 5 represents the maximum speed. When cooking small products,
thin products or liquids, choose a low level (1 or 2) or opt for the pulsed mode, alternating the fan speed
as required.
Pulse mode is only available if the set temperature is below 160°F.
To access the fan speed setting screen, simply press the dedicated button to display it, allowing you to
adjust the fan speed to suit your needs.
Recipe manager
Displays the recipe manager screen with the various steps and messages of the selected recipe in the
form of a vertical diagram with a numerical marker, as well as the total time of the recipe
Recipe manager).
Save
Saves the cooking process / recipe.
History
The "History" screen acts as an exhaustive logbook, recording all successful processes, whether they be
cooking cycles, recipes or cleanig cycles. Consult this history for useful information on previous cooking
parameters, results achieved, as well as cleaning cycles performed.
Cooling & holding
Allows the cooking in progress to be maintained at a suitable temperature while waiting to unload.
(►Additional functions -
Cooling and Holding)
This function can also be used to cool the cooking cavity between two cooking (without food in the cavity).
If you have cooked at a high temperature and are about to cook at a low temperature, to save a little time,
simply press this button to start cooling the oven.
Warning: cooling is set (temperature, water or air), do not leave food in the oven
and Installation).
Delayed
Delay start is a function that allows you to programme the start of a cooking cycle at a later time. This offers
valuable flexibility when planning the cooking of dishes, allowing users to prepare food in advance and
cook it later, even when they are away.
– Save a recipe)
(► Recipes
(► Additional functions -
Page 56 / 161
Delta T setpoint
Start cooking
Functions
(► Recipes
(► Additional functions
- History)
(► Parameters -
Delayed start)
3V-490099EU – 04/25
EN
–
Cooking
Publicité
