Publicité
4 - GENERAL
Pre-cooling complete
Back to the settings screen
» Press the "Back" icon or any non-active area of the screen.
The screen displays the setting screen for the current step.
Screen: Load
At the end of the oven pre-heating phase, you will be prompted to load the products into the oven. To continue, press the
button, or close the door. A counter will display the time elapsed since the initial message asking you to load the products.
Screen: Unload
At the end of the cooking cycle or in the 'Hold' phase, a message will prompt you to remove the products from the oven. You will be offered a series of
functions to finalise the current cycle. To continue, press the '✓' confirmation icon, then press the 'End' button or close the door. A counter displays the
time elapsed since the initial message requesting unloading of the products.
The options available for finalising the cycle in progress include 'restart', 'save', 'end', 'add time', as well as 'move core probe'. The 'End' button closes
the selection window and stops the current cycle. Depending on the settings for the cooking in progress, the 'Add time' and 'Move core probe' buttons
will be activated or deactivated. Use these functions to efficiently manage the end of your cooking cycles and ensure optimal unloading of the
products.
Display of the cooking cavity ambiance
When the monitoring screen is displayed (cycle in progress), the upper part of the screen shows the cooking ambience parameters for the current
step. Press the zone to display the cooking ambience parameters screen for the current step.
Information about the cavity
CHEF'SCOMBI
Cooking in progress
Restart
This function allows you to restart cooking with the previous settings. Press the key, and the display will
show the previous screen with the 'Start' key activated.
Save
This function saves the recipe in the user library. Press the key, then '✓', to access the 'Recipe manager'
screen and define the save parameters
End
This key closes the window of functions available at the end of the cooking cycle.
Add time
The function allows you to adjust the cooking time according to specific needs, offering total flexibility to
achieve perfect results. Press the button, then enter the additional time you require in the time box. Cooking
will continue for the specified period, using the cooking settings from the last step. The remaining time
counter will be adjusted accordingly.
Move core probe
This function is useful for repositioning the core probe to ensure accurate core temperature measurement,
thus ensuring optimal cooking. Press the button and you will continue cooking by opening the door and
repositioning the probe in a thicker or colder product. When you close the door, cooking will continue until
the set core temperature is reached.
cooking
Cooking complete
(► Recipes
- Creating a recipe).
Upper part
Page 21 / 161
EN
In hold mode
"✓
" icon and then the "Load"
3V-490099EU – 04/25
Publicité
