Publicité
8 - COMBICARE
Interrupting a cleaning during the detergent tablets insertion phase
»
Press the
"
" icon without having inserted any detergent tablets/sticks.
The cleaning is cancelled and the screen returns to the to the « CombiCare » menu.
Interrupting a cleaning in progress
»
Press the "back" arrow for a few seconds.
A pop-up appears, indicating the time required to interrupt the clean and asking you to confirm that you wish to
stop the process in progress.
» Confirm by pressing the
The cleaning interruption phase begins.
An acoustic signal will sound when the automatic cleaning interruption program is complete, and a time counter
will indicate the time elapsed since the interruption.
» At the end of the program, press the «
The display returns to the "Home" menu.
8.6
STARTING DESCALING
When you open the "CombiCare" menu, the descaling function is selected by default if the number of sticks indicated on the "Descale" button is equal
to or greater than 1. The user cannot start a descaling programme without combining it with a light, medium or strong cleaning programme
CombiCare
- Start an automatic clean with or without descaling).
It is possible to deselect the descaling function as long as the number of sticks indicated is less than 3. However, from number 2 upwards, it is
advisable to carry out descaling to maintain your oven's optimum performance. From 3 sticks upwards, descaling is automatically carried out in
addition to the selected clean programme (the "Descale" button cannot be deselected).
8.7
CLEANING STATUS
This function, which can only be set in the recipes, determines the degree of soiling in the oven. This has a direct influence on the cleaning program
recommended when the "CombiCare" menu is opened. Each cooking or recipe performed adds a value to the counter, thus determining the degree of
soiling in the oven, and by extension, the recommended cleaning
At the same time, the number of cleaning operations carried out and their level have a decrementing effect on this counter, influencing the overall degree
of soiling in the oven.
Reset wash status gauge
You have the option of resetting the oven's soiling status counter, in order to fine-tune the recommended cleaning programs to your specific oven
usage, particularly in the case of numerous reheating cycles.
» Press the « + » customization icon.
The personalization screen appears.
» Press the « Reset cleaning status » button.
The counter reset confirmation message appears.
» Confirm by pressing the
CHEF'SCOMBI
"✓
" icon.
✓
» icon.
We strongly advise you not to carry out descaling without inserting sticks in the dedicated hatch.
Doing so will cause even more limescale to build up on your boiler, making it impossible to use the
oven and requiring the intervention of a qualified technician.
"✓
" icon.
level.
Page 35 / 161
EN
(►
3V-490099EU – 04/25
Publicité
