Publicité
14 - WARNING MESSAGES
Reset the water treatment capacity counter
»
From the "Home" menu screen,
The screen displays the "Parameters" menu with the "User" tab selected.
» Select the "Cooking and Installation choices" button.
The screen displays the "Cooking and Installation" settings.
» Press the "Reset" button opposite "Reset remaining capacity".
The counter reset confirmation message appears.
» Confirm by pressing the
14.1.2 PREVENTIVE MAINTENANCE
The only time this message appears is when the oven requires preventive maintenance. This condition is met if the counter has been configured in the
installation parameters by the technician when the appliance was installed.
This counter, which is adjusted according to the frequency of use and the time lapse between two service calls, means that you are automatically alerted
as soon as a service call is required. It is imperative that these values are entered by the technician when the oven is first installed and that they are
checked after each maintenance operation.
14.2
AT THE END OF A COOKING PROCESS OR BETWEEN TWO COOKING PROCESSES
14.2.1 SCHEDULED FORCED CLEANING
This message only appears if cleaning has been scheduled in the CombiCare screen customisation (► CombiCare: Scheduled cleaning).
It is important to follow this cleaning schedule to ensure the smooth operation and longevity of your appliance. Regular cleaning allows you to maintain
optimal
cooking
conditions
To start cleaning, press the "CombiCare" icon and follow the detailed instructions available in this manual (► CombiCare). Be sure to use the
recommended products for an effective result and to preserve the internal components of your oven.
CHEF'SCOMBI
select the "Settings" button.
"✓
" icon.
➔
Warning message
This message appears each time the oven is switched on if the operating time
programmed in the preventive maintenance counter is reached or less than 10 days
➔
remaining.
Notify the maintenance service for an intervention as soon as possible.
If the number of days remaining is less than 0, the message displays the number of
days past the scheduled oven maintenance date
and
prevents
the
build-up
➔
Warning message
This message appears at the date and time scheduled for a planned cleaning cycle.
You can defer this cleaning up to three times. After these three delays, the cleaning
cycle must be executed before you can continue with a new cooking cycle.
of
residues
that
Page 71 / 161
could
affect
the
oven's
3V-490099EU – 04/25
EN
performance.
Publicité
