Finding A Place For The Printer - Epson EPL-5000 Guide De L'utilisateur

1

Finding a place for the printer

Place your printer close enough to the computer or workstation
o
for its cable to reach.
Use a grounded outlet, one that has three holes to match the
o
power plug on the printer. Do not use an adapter plug.
Leave adequate room around the printer to allow easy operation
o
and maintenance and sufficient ventilation. The diagram below
shows the recommended amount of space.
If you install the optional face-up output tray, you need
o
additional space as shown in the illustration.
If you install the optional lower paper cassette, you need an
o
additional 80 mm (3.2 inches) above the printer.
100 mm (4") minimum each side
Optional face-up output tray
350 mm (14") minimum
456 mm (18")
432 mm (17")
from the bottom
1