Publicité
Les langues disponibles
Les langues disponibles
4.
Lift the printer on each side, making sure the front of the printer faces the same
way as the front of the cassette. Then align the printer with the cassette,
using the two alignment pins. These pins fit into the two holes on the bottom
of the printer. Lower the printer until it rests on the cassette.
c
Caution:
When lowering the printer, be sure the interface cable is not
pinched between the printer and the lower paper cassette.
Note:
The printer is heavy, so you may need to have someone help you lift it.
5.
Reconnect any interface cables you removed.
6.
Be sure the power is turned off and then plug the power cord into the printer
and into an electrical outlet.
7.
Turn the printer on.
To select paper feed from the optional lower paper casstte, you need to set OPT
or AUTO in the SelecType Level 1 INPUT menu. For more information on
INPUT, see Chapter 2 "SelecType."
D-4
Option Installation
Publicité
Chapitres
Dépannage
