Epson EPL-5000 Guide De L'utilisateur page 512

LANG.
DENSITY
TONER
VERSION
PAGE
COUNTER
RITech
STANDBY
MANUAL
FEED
OPT
Specifies the language to use for messages that
appear on the display.
Specifies the print density.
Displays the approximate amount of toner
remaining in the imaging cartridge. This menu
item can also be used to specify the expected
service life (number of pages) for a newly
installed cartridge.
Displays the version numbers of the printer's
firmware components, such as the controller and
fonts.
Displays the total number of sheets printed to date
by the printer.
Specifies a setting for EPSON's Resolution
Improvement Technology, which improves
printing for text and graphics.
Switches the Standby mode on and off. When
Standby is switched on, the printer enters the
Standby mode if the printer is not used for 15
minutes.
Switches manual feed on and off. When manual
feed is switched on, the message MANUAL
FEED is shown on the display along with the
current paper size setting while printing.
Selects between an optional font cartridge and the
EpsonScript Level 2 ROM module
(if both are installed).
2-5
SelecType