Epson EPL-5000 Guide De L'utilisateur page 685

@EJL<WS> ENTER<WS>Option[<WS>]= [<WS>]<Value>[<CR>]<LF>
Option (Value):
Description:
@EJL<WS>COMMENT<WS><comment strings>[<CR>] <LF>
Description:
@EJL<WS>INQUIRE<WS>NAME[<CR>]<LF>
Description:
between the computer and the printer, your
@EJL<WS>ID[<WS>][<CR>]<LF>
Description:
@EJL<WS>SELECT[<WS>Option[<WS>]=[<WS>]Value][<CR>]<LF>
Option (Value):
Description:
@EJL<WS>SET[<WS>Option[<WS>]= [<WS>]Value][<WS>][<CR>]<LF>
Description:
Option (Value):
@EJL<WS>DEFAULT[<WS>Option[<WS>]=
[<WS>]Value][<WS>][<CR>]<LF>
Description:
C-14
Command Summary
LANGUAGE (LJ4L, LQ, FX, EPSON GL2, SCRPT2*, WPS*)
* Available only when the appropriate option module
is installed.
Enter printer emulation from EJL mode
Enter comments
Inquires printer name. If you are using a bidirectional
printer outputs the following answer strings:
@EJL ANSWER NAME = <Printer name> <CR> <LF>
Send the device ID to host computer
LANGUAGE (LJ4L, LQ, FX)
Specify the available language under EJL mode
Specify the setting
STANDBY (ENABLE, DISABLE), TOPOFFSET (0 to 99),
LEFTOFFSET (0 to 99), PAGESIZE (LT, LGL, A4, EXE,
MON, C5, DL, A5, B5, HLT, GLT, GLG, F4, C6,
POSTCARD, COM10, IB5)
SRCSYSMSET (0 to 3199), DESTSYMSET (0 to 3199)
CGTABLE (ITALIC, PCUSA, PCMULT, PCPORT,
PCCANF, PCNORD, DLOAD)
AUTOCR (ON, OFF), ZERO (NORMAL,
SLASHEDZERO), WIDEPAGE (ON, OFF),
BITIMAGE (DARK, LIGHT, BCODE)
Save the setting in EEPROM as the default of the EJL
mode settings
inter