Epson EPL-5000 Guide De L'utilisateur page 624

IMAGE OPTIMUM (warning)
The printer cannot print in the requested quality because of
insufficient memory, and the printer reduces the quality automatically
so that printing can continue. Check to see if the printout is
acceptable. If not, you must increase available memory by adding
more memory.
INITIALIZE (status)
The printer is being initialized. SelecType settings return to the
settings in effect at power on and the buffer is cleared.
INSUFF. MEMORY
The printer does not have enough memory available for
the current printing job. Data in printer RAM, such as a downloaded
font, is lost. Press Continue to clear the error. To print the page
causing the problem, you will have to either simplify it or add more
memory to the printer.
MANUAL FEED XXX (status)
Manual feed mode is specified for the current print job. Make sure the
paper size indicated by XXX is loaded in the standard feeder, then
press On Line.
If your job should not be printed in manual feed mode, press
Continue. The printer feeds paper from the standard tray.
For detailed information on MANUAL FEED, see Chapter 2.
Troubleshooting and Maintenance
6-17