Remote Control Panel Utility; Epson Lq And Fx Emulation Modes - Epson EPL-5000 Guide De L'utilisateur

Remote Control Panel Utility

The Remote Control Panel utility, which ships with the printer, allows
you to adjust certain printer settings. Normally you do not need to use
the Remote Control Panel utility because most printer settings
contained on the utility can also be set using your software program.
Whenever you can, use your software program to change printer
settings; not only is this method more convenient, but the printer
settings in your software program override those of the Remote
Control Panel.
The Remote Control Panel does contain some settings that are not
accessible from your software program. These settings are assigned
default values that should work for your printer in most situations.
However, if you need to, you can use the Remote Control Panel to do
the following:
Specify the size of paper loaded in the paper tray
o
Turn the Toner Save Mode on or off
o
Change the print density
o
Turn the Standby mode on or off
o
Specify the top and bottom offset values
o
Change the emulation mode
o
See Chapter 4 for more information about the Remote Control Panel.

EPSON LQ and FX Emulation Modes

Your printer is designed to work best in its HP LaserJet 4L emulation
mode, so you should use this mode whenever possible. However, your
printer can also emulate an LQ or FX series printer, if necessary.
Using Your Printer
1-9