Epson EPL-5000 Guide De L'utilisateur page 541

T-MARGIN
Use this item to specify the distance from the top of the sheet to the
baseline of the first printable line (top margin). This is measured in
0.05-inch increments. The factory setting is 0.50 inches.
Menu/submenu
A T-MARGIN 0.50 >
TEXT
Use this item to set the page length. The unit of measure for this
option is 1/6 inch. The factory setting is 66 (line spacing
of 6 lines per inch).
Menu/submenu
A TEXT 66 LINES >
If you change the ORIENT., PAGE SIZE, or FORM TOP settings with SelecType, the page
length setting automatically returns to the default setting for each paper size.
SKIPBOTTOM
When you set SKIPBOTTOM to ON, the printer inserts the number of
line spaces specified by the ESC N (skip-over- perforation) command
between the last line printed on one page and the first printable line on
the next page. The total number of lines skipped equals the FORM
TOP setting plus the amount of skip-over-perforation set with ESC N.
Since most application programs insert their own top and bottom
margins, use this feature only if your program does not provide them.
Menu/submenu
A SKIPBOTTOM OFF >
2-34
SelecType
Available options
0.50* to 1.50 (inch)
Available options
1 to available
Available options
ON or OFF