Epson EPL-5000 Guide De L'utilisateur page 574

4. After selecting a port name, click OK to return to the Font
Manager window. You can also return to the Font Manager
window without selecting a port by clicking Cancel.
When you return to the Font Manager window, you will notice
the addition of Move and Copy buttons. Also, the Copy Port
button is now a Close Port button.
You can use the Close Port button to abort the font copy/move
operation at any time. The functions of the Move and Copy
buttons are described below.
5. Select the fonts you want to copy or move to the port you
selected by highlighting their names in the Installed Fonts list.
6. After selecting the fonts, click Move or Copy.
Clicking Move causes the fonts to be moved to the list on the right
for the port you selected. The move operation deletes the fonts
from the Installed Fonts list.
Clicking Copy causes the fonts to be copied to the list on the right
for the port you selected. The copy operation leaves the fonts
in the Installed Fonts list.
7. After you finish copying or moving the fonts you want, click Exit
to return to the Main window.
Printer Driver Configuration
3-29