Publicité
Les langues disponibles
Les langues disponibles
Display
The display shows the following:
Status messages, such as WARMING UP, indicate the printer's
o
current status.
Error messages, such as PAPER OUT, identify maintenance
o
procedures you must perform or error conditions you need to
correct.
SelecType options, such as EMULATION, allow you to control
o
the printer mode, font selection, paper handling, and several other
printer functions.
For a complete list of status and error messages, see Chapter 6. For
information on SelecType, see Chapter 2.
Indicator lights
On Line
Continue
Feed
1-4
Using Your Printer
On when the printer is on line, indicating the printer
can receive and print data. When the printer is off
line, this light is off. The light flashes as the system
switches between on-line and off-line status.
Flashes when an error is detected or a maintenance
procedure must be performed.
At the same time, an error or maintenance message
appears on the display.
Flashes also in the manual feed mode.
On when data is received and stored in the printer's
buffer but not yet printed. Rapid flashing indicates
the printer is receiving data from the computer. If the
light flashes slowly, the printer is receiving data
through an interface other than the currently selected
interface.
Publicité
Chapitres
Dépannage
