Publicité
Les langues disponibles
Les langues disponibles
Auto Continue
Permits the printer to automatically recover from a Print Overrun
or Insufficient Memory error. The printer then continues printing
after a wait of five seconds.
When Auto Continue is off, you must press the Continue button
on the control panel to resume printing. In most cases, leave Auto
Continue off so you are aware of the error messages and can
make the necessary corrections. You might want to set Auto
Continue on when printing long jobs or when you are away from
the printer for long periods.
Toner Save Mode
Turns Toner Save Mode on when you press the Toner Save Mode
button on the printer's control panel.
The Toner Save Mode uses less toner than normal. The printer
saves toner by substituting a gray shade for the black inside of
characters. The outlines of the characters are still printed in full
black.
Image Optimum
Reduces the amount of graphics data when the data reaches the
memory limit, allowing complex documents to be printed. When
this mode is on, the graphics quality is reduced. The options are
Off, On, and Auto. On and Auto are the same. This option is not
available in LQ or FX mode.
4-12
Remote Control Panel Utility
Publicité
Chapitres
Dépannage
