Publicité
Les langues disponibles
Les langues disponibles
5.
Secure the interface card in the slot with the two screws included with the
interface card.
6.
Connect the proper interface cable to the interface and to your computer. Also,
reconnect the other interface cables if you disconnected them from your
computer. See the Getting Ready! guide for assistance.
7.
Insert the interface cable into the U-shaped part of one cable clip. Lift the left
side of the printer up slightly. Then hook the short lip of the clip into the
forward slot and push the bottom of the clip under the printer until it clicks
in place. Repeat with the second clip and install in the rear slot.
Note:
Hook no more than two cables into one cable clip. Never put too much
pressure on the cables.
D-18
Option Installation
Publicité
Chapitres
Dépannage
