Adjusting Print Density - Epson EPL-5000 Guide De L'utilisateur

Adjusting print density

Note:
Do not change the print density unless it is necessary. Changing the
print density affects all text and graphics, so check the new setting by
printing several pages with various kinds of text and graphics.
If your test print pages are too light or too dark, adjust the print
density by using SelecType, the printer driver, or the Remote Control
Panel utility packed with your printer.
Using SelecType:
Enter SelecType Level 2 and press u or d until DENSITY appears on
the display; press r and then press u or d to select your desired setting;
press r and press Exit.
Using the printer driver:
Click the SelecType button in the Main window, then change the
setting in the Density pull-down menu.
Using the Remote Control Panel utility:
Bring up the Remote Control Panel by typing EPRCPL at a DOS
prompt; select the appropriate emulation from the main Remote
Control Panel window; click the Printer Setup button. Then change
the Density setting.
Note:
Increasing the print density increases toner consumption. If you select
darker print, you may need to replace the imaging cartridge more
often.
6-25
Troubleshooting and Maintenance