Setting Up The Printer - Epson TM-T88V-i Manuel De L'utilisateur

Take care not to injure your fingers on the manual cutter
• When you remove printed paper
• When you perform other operations such as loading/replacing roll paper
To ensure safety, unplug this product before leaving it unused for an extended
period.
Before moving this product, be sure to unplug it and all the cables connected
to it.
Do not connect a telephone line to the drawer kick-out connector; otherwise
the printer and the telephone line may be damaged.
Caution Labels
The caution labels on the product indicate the following precautions.
CAUTION:
Do not touch the thermal head and the frame on its side (indicated in the circle
in illustration O on page v) because it can be very hot after printing.
CAUTION:
Touching the manual cutter may cause injury.
CAUTION:
When connecting external devices to the USB (including Micro-USB)
connectors, follow the precautions below.
• Confirm the rated current of the external devices by checking the
descriptions on the devices or manuals. Do not use a device whose
rated current is unclear.
• Use the UL-approved external devices (only for North American users).
• Connect the external devices only when those total rated current is less
than 2.0 A.

Setting Up the Printer

CAUTION:
The following optional products cannot be used for this printer.
• Wall Hanging Bracket Set (WH-10)
• Power Supply Cover (OT-BX88)
To set up the printer, follow the steps below.
1. Unpacking (See "Unpacking" on page 4.)
2. Connecting to a power source
(See "Connecting to a Power Source" on page 5.)
3. Connecting to an external device
(See "Connecting to External Devices" on page 5.)
4. Attaching the connector cover
(See "Attaching the Connector Cover" on page 6.)
5. Installing the roll paper (See "Installing Roll Paper" on page 6.)
6. Operation check with test print (See "Test Printing" on page 7.)
TM-T88V-i User's Manual 3
English