Sunrise Medical Quickie Iris Manuel D'utilisation Et Garantie page 16

16
Do not use the chair as a seat in a motor vehicle without the use of the "transit locking pin" for chairs
with the heavy duty package and users who weigh more than 250 lbs.
To locate the Transit Locking Pin
The locking transit pin is located on the internal plate of the carriage (F) in the
gripper clip (E).
To use the pin:
1. Bring the tilt down near to the horizontal position.
2. Take the pin out of its receptacle (E).
3. Insert the pin from the inside through the carriage plates and the rocker (D).
4. To take off, pull the pin out and store it back into the receptacle (E).
NOTE– To obtain a copy of SAE J2249 Wheelchair Tie down and Occupant Restraint Systems for Use in
Motor Vehicles, please contact: SAE International, 400 Commonwealth Drive, Warrendale, PA
15096 • (412) 776-4970.
If you fail to heed these warnings damage to your chair, a fall, tip-over or loss of control may occur and
cause severe injury to the rider or others.
931135 Rev. A
E n g l i s h
V I I . W a r n i n g s : F o r S a f e U s e ( A t t e n d a n t s )
C
D
E