Product Description; Equipment And Accessories; How To Use The Device; Initial Product Set-Up - ARCHEON EOlife Instructions D'utilisation

VI. Product description
o The device is a portable machine that includes the EOlife® electronic unit, its removable and rechargeable battery,
its charger and the single-use FlowSense® sensor (the expiry date is specified on the outer packaging) EOlife® is an
electro-medical device
FlowSense® sensor
Touch screen
Red LED
Bumpers
o EOlife® is used with the FlowSense® sensor which is positioned between a non-invasive ventilation interface (mask),
invasive ventilation interface (endotracheal tube), or any type of supraglottic airway device, and a standard self-inflating
bag to manually ventilate adult patients
Note
The ventilation interface and the self-inflating bag are accessories not supplied by ARCHEON
Mask
o EOlife® allows the user to choose the resuscitation mode (continuous ventilation or CPR with a 30:2 compression/
ventilation ratio) and the patient's height
Based on the inspiratory and expiratory flow rates measured during ventilation, EOlife® calculates the main ventilation
parameters (insufflation volumes, tidal volumes, ventilation frequency and leakage) and gives real-time feedback on the
ventilation performed EOlife® also shows the target ventilation values (in accordance with the guidelines issued by the
AHA and ERC international scientific committees in 2015) to guarantee adequate ventilation
o EOlife® records the ventilation data, which can be exported to another device for research, analysis or training EOlife®
includes a Bluetooth low energy wireless module to communicate with such devices
32
Removable battery
Physical ON/OFF button
Self-inflating bag
VII. Equipment and accessories
Equipment
EOlife®
EOlife® premium pack
Battery
Charger and 4 adapters
FlowSense®
Carrying-case
Kit-bag
The equipment and accessories can be ordered from approved distributors
VIII. How to use the device
This section gives a short step-by-step description of how to use the EOlife® device There is a more detailed description in the
next section, "IX Detailed product description and operating instructions"

1. Initial product set-up

Note
The initial set-up process must be implemented only once, when you receive the EOlife® device
Charge the battery fully Press the physical ON/OFF button
1 3
•
See "IX 3 a) Charging the battery" to show the summary screen
Start up EOlife® by pressing
2
the physical ON/OFF button
5
Time
Date
Language
Interface
mode
A0000055
A0000060
A0000051
A0000029
A0000041
A0000036
A0000033
Display the set-up screen
4
Select the date, time and language
and choose the desired interface
•
See "IX 2 a) Set-up screen display"
Summary screen
and "IX 2 b) Choice of interface"
Set-up screen
Part Number
33