Télécharger Imprimer la page

Specifications - Rotel RSP-1576MKII Manuel De L'utilisateur

Masquer les pouces Voir aussi pour RSP-1576MKII:

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 29
28
and display. The time required for the handshake varies depending
on the attached equipment.
Controls do not operate
Make sure that fresh batteries are installed in the remote.
Make sure that the IR sensor on the front panel is not blocked. Aim the
remote control at the sensor.
Make sure the sensor is not receiving strong IR light (sunlight, halogen
lighting, etc.).
Unplug the unit from the AC outlet, wait 30 seconds, and plug it
back to reset.
Confirm the IR Codeset set in the remote control and RSP-1576MKII
are matched to either Codeset 1 or Codeset 2.
Use of the Made for Apple badge means that an accessory has been
designed to connect specifically to the Apple product(s) identified in the
badge and has been certified by the developer to meet Apple performance
standards. Apple is not responsible for the operation of this device or its
compliance with safety and regulatory standards
Apple, Apple TV, Apple Watch, iPad, iPad Air, iPad Pro, iPhone, and Lightning
are trademarks of Apple Inc., registered in the U.S. and other countries. tvOS
is a trademark of Apple Inc.

Specifications

Audio
Total Harmonic Distortion
Intermodulation Distortion (60 Hz : 7 kHz, 4:1)
Frequency Response
Signal to Noise Ratio (A-weighted)
Input Sensitivity/Impedance
Preamp Output Level
Channel Separation (at 10k Hz)
Digital Audio
Video
Input Resolutions
Output Resolution
Color Space Support
Deep Color Support
HDMI Inputs/Outputs
General
Power Consumption
Power Requirements (AC)
BTU
Dimension (W x H x D)
Front Panel Height
Weight
.
All specifications are accurate at the time of printing.
Rotel reserves the right to make improvements without notice.
Rotel and the Rotel Hifi logo are registered trademarks of The Rotel Co., Ltd. Tokyo, Japan.
RSP-1576MKII Surround Sound Processor
Phono Input
Analog Bypass
Digital Input
Analog Bypass
Digital Input
Phono Level
Line Level
Balance Level
Line Level
0.0006% (Analog Bypass)
0.003% (Digital Input)
< 0.005%
20 Hz - 20k Hz, ± 0.5 dB
10 Hz - 100k Hz, ± 1 dB
20 Hz - 20k Hz, ± 0.5 dB
112 dB
112 dB
3.5 mV / 47k ohms
270 mV / 100k ohms
500 mV / 100k ohms
1.0 V
> 75 dB
LPCM (up to 192kHz, 24-bit)
Dolby
®
Surround,
Dolby
®
TrueHD,
Dolby
®
ATMOS,
DTS-HD Master Audio,
DTS X
480i/576i, 480p/576p, 720p,
1080i, 1080p, 1080p 24Hz,
3D, 4K, UHD, 4K 60Hz, 4K HDR10
480i/576i, 480p/576p, 720p
1080i, 1080p, 1080p 24Hz,
3D, 4K, UHD, 4K 60Hz, 4K HDR10
sRGB, YCbCr 4:2:2, YCbCr 4:4:4
24-bit, 30-bit, 36-bit
7 inputs supporting HDCP 2.2, HDMI2.0a
2 outputs supporting HDCP 2.2, HDMI2.0a
Audio Return Channel
60 watts
< 0.5 watt (standby)
120 volts, 60Hz
230 volts, 50Hz
114 BTU/h
431 x 144 x 348 mm
17 x 5
2
/
x 13
5
/
in
3
7
3U / 132.6 mm / 5
1
/
in
4
8.8 kg / 19.4 lbs

Publicité

loading

Ce manuel est également adapté pour:

Rsp-1576