Insertingabobbin - Singer 5417C Manuel D'instructions

SINGE8
Inserting
DO NOT FORGET
WHILE WORKING
Liftpresserfoot,
2. Turn hand wheel toward your direction until needle is in its
highest position.
3. Pull approximately 10 cm of thread from replacement
bobbin andinsert bobbin into case(illustration 1
Note: While unwinding, the bobbin shall turn from right to
left.
4. Holding bobbin in place, guide thread into slot A
(illustration2).
5. Guide the line down the slot to the left around until guiding
slot B (illustration3).
6. Close the bobbin visor partially allowing some thread
(illustration 4) ,
38
a bobbin
TO SWITCH OFF THE MACHINE
IN THE BOBBIN AREA.
o
1
C)
3
2
4