Preparations For Use - REMS Power-Press SE Notice D'utilisation

eng
REMS battery Li-Ion 14.4 V, 3.2 Ah
REMS battery Li-Ion 21.6 V, 1.6 Ah
REMS battery Li-Ion 21.6 V, 2.5 Ah
Rapid charger Li-Ion/Ni-Cd 230 V
Rapid charger Li-Ion 230 V
Voltage supply Li-Ion 230 V, instead of 14.4 V batteries
Sheet steel case, REMS Power-Press SE
Sheet steel case, REMS Power-Press
Sheet steel case, REMS Power-Press ACC
Sheet steel case, REMS Mini-Press ACC / Mini-Press 22 V ACC
Sheet steel case, REMS Akku-Press / REMS Akku-Press ACC
Sheet steel case, REMS Ax-Press 40
Sheet steel case, REMS Akku-Ex-Press Q & E
Sheet steel case, REMS Ax-Press 25 ACC / Ax-Press 25 L ACC
Sheet steel case, REMS Akku-Ex-Press Cu ACC
Sheet steel case, REMS Akku-Ex-Press P / Akku-Ex-Press P ACC
Sheet steel case, Combi Set REMS Ax-Press 25 ACC
and Akku-Ex-Press P ACC
REMS CleanM
1.3. Capacity
REMS Mini-Press ACC / Mini-Press 22 V ACC Radial press
for making press joints in all standard press fitting systems
on steel pipes, stainless steel pipes, copper pipes, plastic
pipes, composite pipes
Radial presses REMS Power-Press / Power-Press ACC and
REMS Akku-Press / Akku-Press ACC for making press joints in
all standard press fitting systems on steel pipes, stainless steel
pipes, copper pipes, plastic pipes, composite pipes
Axial presses for making compression sleeve joints (sliding
sleeve joints) on stainless steel pipes, steel pipes, copper
pipes, plastic pipes, composite pipes
REMS Akku-Ex-Press Q & E ACC for expanding of
pipes/coil for the system Uponor Quick & Easy
REMS Power-Ex-Press Q & E ACC for expanding of
pipes/coil for the System Uponor Quick & Easy
REMS Akku-Ex-Press Cu ACC for widening and calibrating
soft copper pipes, soft aluminium pipes, soft precision steel
pipes, soft stainless steel pipes
REMS Akku-Ex-Press P and REMS Akku-Ex-Press P ACC
for widening plastic pipes, composite pipes
Operating temperature range
REMS cordless presses
Battery
Rapid charger
Mains operated presses
1.4. Thrust
Thrust of radial presses, without Mini radial press
Thrust REMS Mini-Press ACC / Mini Press 22 V ACC
Thrust REMS Ax-Press 25 ACC
Thrust REMS Ax-Press 25 L ACC
Thrust REMS Ax-Press 40
Thrust REMS Akku-Ex-Press Cu ACC / P / P ACC / Q&E ACC
Thrust REMS Power-Ex-Press Q & E ACC
The specified forces are nominal forces.
1.5. Electric Data
REMS Power-Press SE
REMS Power-Press
REMS Power-Press ACC
REMS Power-Ex-Press Q & E ACC
REMS Mini-Press ACC
REMS Ax-Press 25 ACC / 25 L ACC
REMS Akku-Ex-Press Cu ACC
REMS Akku-Ex-Press P
REMS Akku-Ex-Press P ACC
REMS Akku-Ex-Press Q & E ACC
REMS Mini-Press 22 V ACC
REMS Akku-Press, Akku-Press ACC
REMS Ax-Press 40
Rapid charger Li-Ion/Ni-Cd
Rapid charger Li-Ion
Voltage supply
1.6. Dimensions
REMS Power-Press SE
REMS Power-Press, Power-Press ACC 370×235×85 mm (14.6"×9.2"×3.3")
16
Ø 10 – 40 mm
Ø ⅜ – 1¼"
Ø 10 – 108 mm
Ø 12 – 40 mm
Ø 16 – 40 mm
Ø ⅜ – 1½"
Ø 16 – 63 mm
Ø 8 – 42 mm
Ø ⅜ – 1¾"
Ø 12 – 40 mm
–10 °C – +60 °C (14 °F – +140 °F)
–10 °C – +60 °C (14 °F – +140 °F)
0 °C – +40 °C (32 °F – +113 °F)
–10 °C – +60 °C (14 °F – +140 °F)
230 V 1~; 50 – 60 Hz; 450 W; 1.8 A
110 V 1~; 50 – 60 Hz; 450 W
S3 20% (AB 2/10 min)
all-insulated, interference-suppressed
14.4 V =; 1.6 Ah
14.4 V =; 3.2 Ah
21.6 V =; 1.6 Ah / 21.6 V =; 2.5 Ah
14.4 V =; 3.2 Ah
Input 230 V~; 50 – 60 Hz; 65 W
Output 10.8 – 18 V – ---
Input 230 V~; 50 – 60 Hz; 70 W
Output 10.8 – 21.6 V – ---
Input 230 V~; 50 – 60 Hz
Output 14.4 V – ---; 6 A – 33 A
430×118×85 mm (16.9"×4.6"×3.3")
571555 REMS Mini-Press ACC
571570 REMS Mini-Press 22 V ACC
571571 REMS Akku-Press, Akku-Press ACC
571560
REMS Ax-Press 25 ACC
571575 REMS Ax-Press 25 L ACC
571565
REMS Ax-Press 40
570280
REMS Akku-Ex-Press Cu ACC
570280
REMS Akku-Ex-Press P,
570280
Akku-Ex-Press P ACC
578290
REMS Akku-Ex-Press Q & E ACC
571290
REMS Power-Ex-Press Q & E ACC
573282
1.7. Weights
578290
REMS Power-Press SE drive unit
578290
REMS Power-Press / ACC drive unit
578290
REMS Mini-Press ACC drive unit without battery
578290
REMS Mini-Press 22 V ACC drive unit without battery
573284 REMS Akku-Press / ACC drive unit without battery
140119 REMS Ax-Press 25 ACC drive unit without battery
REMS Ax-Press 25 L ACC drive unit without battery
REMS Ax-Press 40 drive unit without battery
REMS Akku-Ex-Press Cu ACC drive unit without battery
REMS Akku-Ex-Press P / ACC drive unit without battery
REMS Akku-Ex-Press Q & E ACC drive unit without batt. 2.0 kg
REMS Power-Ex-Press Q & E ACC drive unit
REMS battery Li-Ion 14.4 V, 1.6 Ah
REMS battery Li-Ion 14.4 V, 3.2 Ah
REMS battery Li-Ion 21.6 V, 1.6 Ah
REMS battery Li-Ion 21.6 V, 2.5 Ah
Pressing tongs (average)
Ø ⅜ – 4"
Pressing tongs Mini (average)
Pressing heads (pair, average)
Expanding head (average)
Adapter tongs Z2
Adapter tongs Z4
Adapter tongs Z5
Pressing ring M54 (PR-3S)
Pressing ring U75 (PR-3B)
1.8. Noise information
Ø ½ – 2"
Emission at workplace
REMS Power-Press SE
REMS Power-Press / ACC
REMS Mini-Press ACC / 22 V ACC L
REMS Akku-Press /ACC
REMS Ax-Press 25 ACC / L ACC
REMS Ax-Press 40
REMS Akku-Ex-Press Cu ACC
REMS Akku-Ex-Press P / ACC
REMS Akku-Ex-Press Q & E ACC
REMS Power-Ex-Press Q & E ACC L
1.8. Vibrations
Weighted effective value of acceleration
32 kN
The specified vibration emission value was measured according to a standard
22 kN
test method and can be used for comparison with another power tool. The
20 kN
specified vibration emission value can also be used for an initial estimation of
13 kN
the cut-out.
30 kN
20 kN
CAUTION
34 kN
The vibration emission value may differ from the specified value during actual
use of the power tool depending on the manner in which the power tool is used.
Dependent upon the actual conditions of use (periodic duty) it may be necessary
to establish safety precautions for the protection of the operator.
2. Preparations for Use
CAUTION
After the drive unit has been in storage for a long period of time, the overpres-
sure valve must be actuated first by pressing the reset button (13) before putting
back into operation. If it is stuck or stiff, it may not be pressed. The drive unit
must be handed over to an authorized REMS customer service workshop for
inspection.
The respective latest sales literature applies for the use of REMS pressing
tongs, REMS Mini pressing tongs, REMS pressing rings with adapter tongs,
REMS pressing heads and REMS expanding heads for the different pipe
connection systems, see also www.rems.de → Downloads → Product Cata-
logues, Brochures. If the system manufacturer alters components of pipe
connection systems or markets new ones, their current application status must
be enquired about at REMS (Fax +49 7151 17 07 - 110 or e-mail info@rems.
de). Subject to change and error.
2.1. Electrical connection
WARNING
Note the mains voltage! Before connecting the drive unit or the rapid charger,
check whether the voltage given on the rating plate corresponds to the mains
voltage. On building sites, in a wet environment, indoors and outdoors or under
eng
288×260×80 mm (11.3"×10.2"×3.1")
273×260×75 mm (10.7"×10.2"×3.0")
338×298×85 mm (13.3"×11.7"×3.3")
295×260×80 mm (11.6"×10.2"×3.3")
325×260×80 mm (12.8"×10.2"×3.1")
330×320×85 mm (13"×12.6"×3.3")
265×260×80 mm (10.4"×10.2"×3.1")
275×260×80 mm (10.8"×10.2"×3.1")
290×260×80 mm (11.4"×10.2"×3.1")
420×245×81 mm (16.5"×9.6"×3.2")
4.7 kg (10.4 lb)
4.7 kg (10.4 lb)
2.1 kg (4.5 lb)
2.1 kg (4.5 lb)
3.8 kg (8.3 lb)
2.6 kg (5.6 lb)
2.8 kg (6.1 lb)
5.4 kg (11.8 lb)
2.3 kg (5.0 lb)
2.0 kg (4.4 lb)
(4.4 lb)
5.6 kg (12.2 lb)
0.3 kg (0.6 lb)
0.5 kg (1.1 lb)
0.4 kg (0.9 lb)
0.4 kg (0.9 lb)
1.8 kg (3.9 lb)
1.2 kg (2.6 lb)
0.3 kg (0.6 lb)
0.2 kg (0.4 lb)
2.0 kg (4.8 lb)
3.6 kg (7.8 lb)
3.8 kg (8.2 lb)
3.1 kg (6.7 lb)
2.7 kg (5.9 lb)
L = 76 dB L = 87 dB K = 3 dB
pA WA
L = 81 dB L = 92 dB K = 3 dB
pA WA
= 73 dB L = 84 dB K = 3 dB
pA WA
L = 74 dB L = 85 dB K = 3 dB
pA WA
L = 73 dB L = 84 dB K = 3 dB
pA WA
L = 74 dB L = 85 dB K = 3 dB
pA WA
L = 73 dB L = 84 dB K = 3 dB
pA WA
L = 73 dB L = 84 dB K = 3 dB
pA WA
L = 73 dB L = 84 dB K = 3 dB
pA WA
= 81 dB L = 92 dB K = 3 dB
pA WA
< 2,5 m/s² K = 1,5 m/s²