Hella Gutmann SEG V Mode D'emploi page 98

6. | Installation
5. Open the list with
6. Select the user.
The user selection enables quicker identification of the mechanic who performed the measurements if a query is subse-
quently made.
Perform the steps as described in the section Entering the User Name [
edit existing users.
7. Activate the Stay logged in check box if necessary.
If the Stay logged in check box is activated, you will not need to select a user name when switching on the device in the
future.
8. Confirm your input with
The main menu appears.
ð Now you can start working with the device.
6.3. Switching Off the Device
Proceed as follows to switch off the device:
1. Switch off the device with
2. Observe the confirmation prompt.
3. Confirm the confirmation prompt with
98
.
.
.
. Abort the procedure with
}
102] if you wish to add further users or to
.
Hella Gutmann
SEG V