Hella Gutmann SEG V Mode D'emploi page 137

Hella Gutmann
NOTICE
Perform the headlight test on the left and right headlight respectively.
Proceed as follows to perform a night vision spot light headlight test:
1. Perform the steps 1 to 5 as described in section Performing Adaptive Light Control Tests [} 137].
2. Start the headlight test with
NOTICE
To display the spot light headlights, gently touch the display to display the scrollbar.
If the scrollbar is used to scroll down, then the spot light icon is displayed.
3. Observe the confirmation prompt.
4. Confirm the confirmation prompt with
5. Call up the vehicle testing/calibration mode from the diagnostic device.
6. Follow the instructions on the display of the diagnostic device.
The light distribution of the headlight is displayed on the test screen.
7. In the vehicle setting options, correct the headlight setting according to the recommended settings using the direction
arrows on the test screen.
If the settings are correct, then all arrows light up green.
8. Confirm the setting with
The date and time of the adjustment are displayed next to the symbol.
9. Repeat steps 2-8 to test the second headlight.
8.7.8. Performing Adaptive Light Control Tests
Many modern vehicles have adaptive light control. In these systems, the light distribution of the headlights is automatically
adjusted to different conditions. To test these light systems, observe the instructions from different manufacturers.
SEG V
.
.
.
Working with the Device | 8.
137