Hella Gutmann SEG V Mode D'emploi page 135

Hella Gutmann
The light distribution of the headlight is displayed on the test screen.
5. In the vehicle setting options, correct the headlight setting according to the recommended settings using the direction
arrows on the test screen.
If the settings are correct, then all arrows light up green.
6. Confirm settings with
The date and time of the adjustment are displayed next to the symbol.
7. Repeat steps 2-6 to test the second headlight.
8.7.6. Audi Matrix LED Headlights/HD Matrix LED Headlights
For the Audi Matrix LED headlights, adjusting screws are no longer available for setting the high beam distribution. The
core of the Matrix LED headlight is the glare-free high beam, implemented with a mechanism-free system. Oncoming traf-
fic or preceding vehicles are not blinded by high beam lights that are always on. A camera detects oncoming and preceding
vehicles and omits them from the high beam distribution by dimming or switching off individual LEDs from the high beam
lighting. Once a vehicle is no longer located in the line of sight of the driver, then the system switches the full beam back
on again.
SEG V
.
Working with the Device | 8.
135