Hella Gutmann SEG V Mode D'emploi page 110

7. | Device configuration
The User login window is displayed.
16. Open the virtual keypad under Name with
17. Enter the user name of the sender.
18. Close the virtual keypad with
19. Open the virtual keypad under Password with
20. Enter the user password.
21. Close the virtual keypad with
22. Close the User login window with
The input will be saved automatically.
ð Reports can be sent via e-mail now.
7.9.5. Activate the Screen Duplication
The screen duplication enables to have the SEG V display indicated on an external terminal device via VNC viewer. Thus it
is possible to do all work steps via external device. The response time of the screen indication depends on the network uti-
lization. The example of VNC Connect describes the connection setup.
Proceed as follows to activate the screen duplication:
1. Select Settings > Device > Interfaces > Activate screen duplication.
Regard the info window.
The info window shows the data for connection to the VNC client (PC, tablet etc.) if the screen duplication has been acti-
vated successfully.
2. Start the VNC viewer on the terminal device and set up the connection. For this click to >File< and select >New con-
nection<.
3. Enter the IP address of the SEG-V in line VNC server and confirm the entry with >OK<.
Now the info window of the VNC viewer indicates a symbol with the IP address of the SEG V.
4. Position the cursor on the symbol, push the right mouse button and click to >Connect< .
If the connection has been established successfully, the display of the SEG V is indicated on the terminal device.
5. Click to close the info window in the SEG-V again.
6. Click to >Deactivate screen duplication< to finish the function.
7.9.6. Asanetwork
Asanetwork is is the cross-brand communication standard for linking workspaces in automotive shops. Asanetwork es-
tablishes the connection and, thus, the option to exchange data between the procedures and systems used in the repair
shop, such as inspection and testing devices (engine diagnostics, exhaust-emission check, brake test stand, air condition-
ing service station, headlight aiming device, etc.) and the commercial software in the office (DMS – Dealer Management
System). The compatibility of these devices is required.
110
.
.
.
.
.
Hella Gutmann
SEG V