Hella Gutmann SEG V Mode D'emploi page 133

Hella Gutmann
The date and time of the adjustment are displayed next to the symbol.
7. Repeat steps 2-6 to test the second headlight.
8.7.4. Performing High Beam Headlight Tests
NOTICE
Perform the headlight test on the left and right headlight respectively.
To perform a headlight test on the main beam, proceed as follows:
1. Switch on the high beam headlight on the vehicle.
2. Start the headlight test with
3. Observe the confirmation prompt.
4. Confirm the confirmation prompt with
The light distribution of the headlight is displayed on the test screen.
5. In the vehicle setting options, correct the headlight setting according to the recommended settings using the direction
arrows on the test screen.
SEG V
.
.
Working with the Device | 8.
133