Hella Gutmann SEG V Mode D'emploi page 94

4. | Mounting
4. Mounting
4.1. Mounting the Rubber Castor
The SEG V is entirely assembled except the 3rd rubber castor at the device's base. The delivery contents of the rubber cas-
tor include 3 washers and 2 retaining clips.
Proceed as follows to mount the 3rd rubber castor to the device base:
1. Slide a washer onto the shaft up to the retaining clip.
2. Push the rubber castor onto the shaft up to the washer.
3. Slide the two other washers onto the shaft.
94
Hella Gutmann
SEG V