Hella Gutmann SEG V Mode D'emploi page 103

Hella Gutmann
7.5. Installing Password Protection
The introduction of the General Data Protection Regulation (GDPR) of the European Union which came into force on 25
May 2018 includes the requirement to ensure better protection for customer-related data in devices.
To prevent access to our diagnostic devices by third parties, we have integrated the function Password protection.
NOTICE
If the device no longer has a valid password, it can only be reactivated with the menu >Starting the factory
reset< or with the help of the Hella Gutmann's Technical Help Line. In this case personal data and the Car
History will be cleared, and it might not be possible to restore them again.
Proceed as follows to set up the password protection:
1. Select Settings > User in the main menu.
2. Call up Password management with
NOTICE
The length of the password must not exceed 10 characters.
3. Enter a password and confirm by entering it again.
4. Observe the warning notice and confirm.
ð The device can now be accessed only with the selected password.
7.6. Configuring the SEG V
Here you can calibrate the display brightness, light measuring unit and level compensation, for example.
7.6.1. Setting the Display Brightness
Proceed as follows to set the display brightness:
1. Select Settings > Device >Save energy in the main menu.
2. Open the list under Display brightness with
3. Select the requested brightness value.
The display brightness is adjusted immediately. The selection will be saved automatically.
7.6.2. Automatic display dimming
Proceed as follows to activate or deactivate the display dimming:
1. Select Settings > Device >Save energy in the main menu.
SEG V
.
.
Device configuration | 7.
103