Hella Gutmann SEG V Mode D'emploi page 89

Hella Gutmann
The CMOS camera catches the light distribution of the headlight and transmits it to the electronic evaluation system. In
combination with precise data records the light distribution is displayed on the test screen in almost real time. The soft-
ware guides the user through the evaluation and aiming process based on stored vehicle-specific data and procedures.
The recorded measurement data sets can be transmitted to peripheral devices through the USB or WiFi interface.
3.3. Equipment Overview
12
11
10
9
8
7
6
5
1 ON/OFF button (Switch the laser on and off with
the ON/OFF button.)
3 Protective shield (The protective shield protects
the eye of the user from the laser beam.)
5 Device base (The device base of the SEG V has rub-
ber castors.)
7 USB port (Use the USB port to download updates
from a pen drive or to save reports on a pen drive.)
9 ON/OFF button of optic housing (Switch the device
on or off with the ON/OFF button.)
11 Laser sight handwheel (Loosen the handwheel to
shift the height of the laser sight.)
SEG V
1
2
3
4
2 Laser sight (The SEG V is correctly aligned if the
line laser pointer is parallel to two symmetrical
reference points on the front side of the vehicle.
Alternatively you can use the optical unit (on the
right in the laser sight) for the alignment to the ve-
hicle.)
4 Recessed grip (Adjust the height of the optic hous-
ing with the recessed grip.)
6 Power supply socket (The power supply socket
supplies the device with power and charges the in-
ternal battery.)
8 Optic housing (Use the optic housing to check
modern lighting systems.)
10 Column (Adjust the height of the optic housing at
the column.)
12 Column locking mechanism handwheel (Loosen
the handwheel to turn the optic housing.)
Product Description | 3.
89