Hella Gutmann SEG V Mode D'emploi page 90

3. | Product Description
18
16
15
13 Operating lever (Push the operating lever to adjust
the height of the optic housing.)
15 Fresnel lens (The Fresnel lens bundles the scat-
tered headlight light and projects it to a projection
surface in the optic housing.)
17 Laser sight pinch bolt (Loosen the pinch bolt to ad-
just the tilt angle of the laser sight.)
3.4. Adjusting the Height of the Optic Housing
To set the height of the optical housing, proceed as follows:
1. Hold both handles (4 + 14) on the optical housing (8).
2. Press the control lever (13).
3. Set the desired height.
4. Release the control lever.
ð The optical housing latches in.
3.5. Turning the Optic Housing
To rotate the optical housing, proceed as follows:
90
17
13
14
14 Recessed grip (Adjust the height of the optic hous-
ing with the recessed grip.)
16 TFT display (touch screen) (Select or activate all
menus and functions by slight tipping onto the TFT
display with the finger, the stylus or with the arrow
keys.)
18 Battery compartment (You can insert a 9-V
monobloc battery in the battery compartment of
the laser sight.)
Hella Gutmann
SEG V