Hella Gutmann SEG V Mode D'emploi page 109

Hella Gutmann
1. Select Settings > Device > Interfaces > Network in the main menu.
2. Use for the function Test Wi-Fi configuration.
The Wi-Fi configuration is tested.
ð The address of the selected Wi-Fi is displayed under SEG V IP address if the Wi-Fi configuration has been tested suc-
cessfully.
7.9.3. Reset Wi-Fi configuration
Reset the Wi-Fi configuration again here.
Proceed as follows to reset the Wi-Fi configuration:
1. Select Settings > Device > Interfaces > Network in the main menu.
2. Reset Wi-Fi configuration with
The Wi-Fi configuration is reset.
7.9.4. Sending Reports by E-Mail
Take the corresponding e-mail settings before you can send reports by e-mail.
Proceed as follows to take e-mail settings:
1. Select Settings > Device > Interfaces > E-Mail in the main menu.
2. Open the virtual keypad under Receiver address with
3. Enter the e-mail address of the receiver.
4. Close the virtual keypad with
5. Open the list under Server settings with
Further settings are not necessary if >Automatically< is selected.
Continue with steps 6-22 if >Manually< is selected.
6. Open the virtual keypad under Host with
7. Enter the host name of the outbox server.
8. Close the virtual keypad with
9. Open the virtual keypad under Port with
10. Enter the port number of the outbox server.
11. Close the virtual keypad with
12. Open the virtual keypad under Sender address with .
13. Enter the e-mail address of the sender.
14. Close the virtual keypad with
15. Click under User login.
SEG V
.
.
.
.
.
.
.
.
.
Device configuration | 7.
109