Hella Gutmann SEG V Mode D'emploi page 97

Hella Gutmann
6. Installation
This section gives a description of how to switch the device on and off as well as all the necessary steps for the first use of
the device.
6.1. Charging the Battery
Prior to putting the device into operation, charge the integrated battery for at least 3 to 4 h. Then charge the integrated
battery regularly, e.g. overnight.
NOTICE
In order to ensure proper operation, we recommend charging the SEG V daily (preferably overnight).
Proceed as follows to charge the battery:
1. Connect the power supply plug into the device's socket.
2. Plug in the power plug into the socket.
ð The battery is being charged.
6.2. Switching On the Device
NOTICE
When starting the device for the first time and after every software update, you need to confirm the general
terms and conditions (GTC) of the Hella Gutmann Solutions GmbH. Otherwise, certain device functions will
be unavailable.
The first time the device is started you need to confirm also the order processing agreement of the
Hella Gutmann Solutions GmbH. This contract governs the handling of personal data pursuant to the
GDPR.
Proceed as follows to switch on the device:
1. Keep the ON/OFF button of the optic housing (9) pushed for at least 5 s.
The device boots.
The GTCs appear.
2. Read the GTCs and confirm them at the end of the text.
The order processing agreement is indicated.
3. Read the order processing agreement, then confirm it and agree to it at the end of the text.
4. Confirm your input with
The window User selection appears.
SEG V
.
Installation | 6.
97