Hella Gutmann SEG V Mode D'emploi page 83

Hella Gutmann
2. User Information
2.1. Safety Precautions
2.1.1. General Safety Precautions
• The device is intended for use on motor vehicles only. It is a precondition for the use of the device that the user has
knowledge of automotive technology and is therefore aware of the sources of danger and risks in the workshop and
on motor vehicles.
• Please read the entire user manual thoroughly and carefully before using the SEG V. You can also find the user man-
ual on the enclosed HGS data carrier.
• All notes given in the individual sections of this user manual apply. It is important to regard the following measures
and safety precautions.
• Furthermore, pay attention to all general instructions from labor inspectorates, trade associations and vehicle manu-
facturers as well as all laws, legal ordinances and instructions which have to be commonly obeyed by a repair shop.
2.1.2. Safety Precautions for the SEG V
In order to avoid incorrect handling and injury to the user or destruction of the SEG V arising from this, pay attention to
the following:
• Select functions and menus on the TFT LCD only with clean fingers. Do not use tools such as a screwdriver.
• Only connect original power adapters to the power cord (supply voltage 115 to 230 V / 50 to 60 V).
• Protect the TFT LCD and the device from long periods of exposure to solar radiation.
• Protect the Fresnel lens of the SEG V from direct solar radiation. The concentration of light beams can lead to thermal
overload or even fire damage on the SEG V.
• It is recommended to cover the beamsetter box with a protective cover (8XS 002 500-031) after having finished work
with the SEG V.
• Protect the product and the connecting cable from hot components.
• Protect the product and the connecting cables from rotating parts.
• Regularly check the connecting cables/accessory parts for damage (destruction of the product due to short circuit).
SEG V
User Information | 2.
83