Hella Gutmann SEG V Mode D'emploi page 132

8. | Working with the Device
8.7.3. Performing Low Beam Headlight Tests
NOTICE
Perform the headlight test on the left and right headlight respectively.
To perform a headlight test on the low beam, proceed as follows:
1. Switch on the low beam on the vehicle.
2. Start the headlight test with
3. Observe the confirmation prompt.
4. Confirm the confirmation prompt with
The light distribution of the headlight is displayed on the test screen.
5. In the vehicle setting options, correct the headlight setting according to the recommended settings using the direction
arrows on the test screen.
If the settings are correct, then all arrows light up green.
6. Confirm settings with
132
.
.
.
Hella Gutmann
SEG V