Hella Gutmann SEG V Mode D'emploi page 127

Hella Gutmann
NOTICE
Deletion processes cannot be undone.
8.4.5. Performing Documented Tests with Manually Created Vehicle
NOTICE
A documented test can only be done when the company data has been entered.
Proceed as follows to perform a documented test for a manually created vehicle:
1. Select >Documented test< in the main menu.
2. Observe the info window where necessary.
3. Confirm the info window with
4. Choose to call up the Manually create vehicle option.
5. Click to open the virtual keypad under Manufacturer.
6. Enter vehicle manufacturer.
7. Close the virtual keypad with
The input will be saved automatically.
8. Repeat steps 5–7 to make more inputs.
9. Confirm the inputs with
The Vehicle selection window is displayed.
10. Open the virtual keypad under Registration number with
11. Enter the vehicle registration number.
12. Close the virtual keypad with
The input will be saved automatically.
13. Repeat steps 10-12 under Vehicle owner and VIN.
14. Confirm the inputs with
The Target specifications window appears.
15. If required, change the data as described in the section Entering Vehicle Data [} 99].
16. Open the Headlight selection window with
17. Perform the headlight test as described in the section Performing headlight test [} 130].
18. Use to call up the selection window Finish documented test?.
19. Use the selection window to:
SEG V
where necessary.
.
.
.
.
.
.
Working with the Device | 8.
127