Spare Parts And Accessories - BÖCKMANN KK 3015/27 H Mode D'emploi

10 Service
Plywood walls and floors expand and
contract minimally depending on the rel-
ative humidity and temperature of the
surrounding air. This is due to the natural
properties of the material. Wooden parts
may warp as a result. The wood grain
and unevenness may become visible on
the surface.
Aluminium surfaces
Aluminium profiles are anodised. The
colours of individual profiles may vary
slightly. This colouring is a characteristic
of the material and does not affect the
use or safety of the trailer.
Rubber surfaces
Due to their material properties, rubber
surfaces may shrink slightly over time.
Galvanised metal surfaces
Galvanised metal surfaces need to oxi-
dise before they can provide effective
protection against corrosion. This oxida-
tion process may take several months.
As long as the metal surface still has a
shiny silver appearance, the oxidation
process is not yet completed.
Galvanised parts are not resistant to cer-
tain aggressive chemical substances
such as acids. Galvanised metal surfac-
es that come into contact with aggres-
sive chemical substances (road salt or
fertiliser) must be rinsed thoroughly with
clean water immediately after the jour-
ney.
Operating Instructions

10.2 Spare parts and accessories

There are two methods for ordering
spare parts or accessories for your trail-
er:
– You can contact the Böckmann deal-
er in your region.
You will find your nearest dealer via
"FIND A DEALER" on our website
www.boeckmann.com
– If there is no dealer in your area, you
can contact Böckmann directly:
Böckmann Fahrzeugwerke GmbH
Siehefeld 5
49688 Lastrup
Germany
Tel: +49 (0) 4472 895-210
Fax: +49 (0) 4472 895-470
Email: etl@boeckmann.com
10.2.1 Reordering keys
You can reorder keys for the following
components:
– Lockable coupling
– Aluminium cover
When ordering, please specify the num-
ber engraved on the key.
The number is engraved on the key and
the lock.
79