Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

8 Cleaning, Maintenance and Inspection
Wood surfaces
Treat regularly with a commercial wood
care product.
Treat damaged areas with wood protec-
tion paint.
Protect from prolonged wetness.
Rubber floor
The rubber floor is glued on and sealed
around the edges along the side walls
with a sealant. Objects with sharp edges
can damage the rubber floor. Check the
sealant regularly for damage and renew
if necessary.
Maintenance schedule
Vehicle part
Tyres
Brake, Bowden cables
Parking brake
Height-adjustable
drawbar
Interval
Before every long journey
Every 5,000 km or annually Lubricate lubrication points
Every 5,000 km or annually Lubricate lubrication points
See additional operating instructions
Operating Instructions
Rear lights and lighting elements
Rear lights and lighting elements must
always be intact, unobstructed and
clean. Wash or clean regularly.
Wheel rims, wheel housings and
fenders
Clean regularly.

8.2 Maintenance

Maintenance work should only be car-
ried out by suitably qualified personnel.
Ensure that maintenance intervals are
observed. The maintenance intervals
are given in the following table.
Maintenance work
Check tyre pressure (See
section 8.4.5 Tyre pressure,
page 68)
Check the tyre tread depth
and exchange the tyres if
necessary (note wear marks
in the tyre tread)
Check wheel bolts and
tighten if necessary (See
section 8.4.4 Wheel bolts,
page 67)
65

Publicité

Table des Matières
loading

Table des Matières