Bodies - BÖCKMANN KK 3015/27 H Mode D'emploi

4 Features
A Anchor track with load restraint
bars
Fig. 32: Anchor track with load restraint bars
Secure the load from slipping by wedg-
ing it between two load restraint bars.
B Safety catches
The safety catch is an additional load-se-
curing component that can only be used
for vehicle transporters.
Fig. 33: Safety catches
Operating Instructions
Installing the safety catch
1. Insert the rigid end of the safety catch
into a hole on the wheel stand rail.
2. Insert the end with the lever into the
parallel hole.
3. Rotate the lever horizontally to se-
cure the safety catch in place.
Removing the safety catch
1. Rotate the lever and hold; pull the
end of the safety catch out of the hole
on the wheel stand rail.
2. Pull the rigid end out of the hole.

4.9 Bodies

The following add-on body parts can be
used:
– Side wall extension (A)
– Box extension (B)
– Canvas cover with frame (C)
– Mesh extension (D).
A Side wall extension
Fig. 34: Side wall extension
33