Vehicle part
Coupling
Anti-skid coupling
Electrohydraulic pump
Safety support
Upper bridge mounting
Lubricants
Use a multipurpose grease in accord-
ance with DIN 51825 KTA 3K for lubrica-
tion.
Fig. 1:
Lubrication points on the coupling
66
Interval
Regularly
Every 5,000 km or annually Lubricate lubrication points
See additional operating instructions
Regularly
Before any use
Before any use
8 Cleaning, Maintenance and Inspection
Maintenance work
Clean
Recharge battery using
charger
Visual check for damage to
battery pole covers and
cables, insulate where neces-
sary.
Visual check for damage on
complete safety support
Visual check for damage on
connection and support
8.3 Brake system
The trailer's brake system must be
checked regularly.
•
Apply the parking brake and check
whether the Bowden cables move
freely.
•
Ensure that any defects are repaired
promptly.
If the brake pads need to be renewed,
make sure the wheel bearings are also
checked for wear and damage.